WMPG 10 kV
Price range: ₹400.00 through ₹800.00 Inclusive of tax
The WOER WMPG 10 kV Busbar Heat Shrink Sleeve is a heavy-duty, radiation cross-linked polyolefin insulation tube engineered specifically for 1 kV to 11 kV/12 kV medium-voltage switchgear and electrical busbar systems. Featuring superior dielectric breakdown strength, flashover prevention, and flame-retardant properties, it allows engineers to safely reduce phase-to-phase and phase-to-ground clearance inside compact electrical substations, control panels, and transformer rooms.
Description
Enhance dielectric safety and prevent flashover faults in medium-voltage electrical installations with WOER WMPG 10 kV Heat Shrinkable Busbar Insulation Sleeving. Formulated from specially engineered, radiation cross-linked non-tracking polyolefin, this heavy-duty sleeve conforms tightly over rectangular, square, and round copper or aluminum busbars when heat is applied.
By providing dependable electrical insulation rated up to 10 kV / 11 kV systems, WMPG significantly reduces clearance distances required between busbars and enclosure metalwork, enabling switchgear manufacturers to build smaller, more compact panels. It offers outstanding resistance against high electrical stress, environmental moisture, chemical vapors, surface tracking, and accidental short-circuits caused by wildlife or foreign objects.
Key Features
-
10 kV / 11 kV Dielectric Insulation: Tested to withstand high dielectric stress, effectively preventing electrical flashovers and short-circuit faults.
-
Reduces Clearance Spacing: Allows up to a 50% reduction in busbar phase-to-phase and phase-to-ground spacing inside switchgear cabinets.
-
Superior Anti-Tracking & Flame Retardancy: Formulated with non-tracking, self-extinguishing polyolefin for maximum safety under electrical discharge.
-
Weather & Chemical Proof: Protects high-purity copper and aluminum busbars from corrosion, industrial fumes, salt spray, and moisture ingress.
-
Standard Phase Identification: Available in standard high-voltage industrial colors (Red, Yellow, Blue, Green/Black) for clean phase identification.
Technical Specifications
| Parameter | Specification |
| Model / Series | WOER WMPG 10 kV |
| Voltage Class | 10 kV (Suitable for 1 kV to 12 kV Distribution Systems) |
| Shrink Ratio | 2:1 / 2.5:1 |
| Material | Cross-Linked Non-Tracking Polyolefin |
| Dielectric Strength | ≥ 25 kV/mm |
| Volume Resistivity | ≥ 1 × 10¹⁴ Ω·cm |
| Operating Temperature | -40°C to +105°C (Continuous) |
| Minimum Shrink Temp | +84°C |
| Full Recovery Temp | +120°C to +140°C |
| Flammability | Self-Extinguishing (GB/T 2408-2008) |
| Standard Colors | Red, Yellow, Blue, Green, Black |
Additional information
| Length |
50 Meters ,100 Meters |
|---|
